ARM Series CNC Waterjet Cutting Machine
- Pump:A50.
- Cutting Table:2010BB.
- Cutting Head: Single head,3 Axis.
- Auto abrasive delivery system.
- PC Based CNC Controller.
- One set of tool and spare parts kits.
Specifications
| Item | 2010BB | 2515BB | 3015BB | 3020BB | 4020BB | 6020BB |
| Model | 2010BB | 2515BB | 3015BB | 3020BB | 4020BB | 6020BB |
| X Stroke (mm) | 2000 | 2500 | 3000 | 3000 | 4000 | 6000 |
| Y Stroke (mm) | 1000 | 1500 | 1500 | 2000 | 2000 | 2000 |
| Z Stroke (mm) | 150 | 150 | 150 | 150 | 150 | 150 |
| A50 PUMP | ||
| Main Motor Power | 37 kW (50 HP) |  |
| Max Pressure | 420 Mpa | |
| Max Water Discharge | 3.8 L/min | |
| Max available Orifice Diameter | 0.33 mm | |
| Pressure Transfer Ratio | 1:21 | |
| Oil tank capacity | 120 L | |
| Power supply | 380 V / 60 Hz / 3 PH | |
| Length/width/height | 1710 / 1500 / 1191 | |
| Weight | 980 kg | |
| Main Parts | Brand | Reference picture |
| Intensifier | YFWATERJET |  |
| Motor | Innomotics (BEIDE) | |
| Hydraulic Pump | YFWATERJET | |
| PLC | OMRON | |
| Heat Exchanger | Air cooling | |
| Control System | LP/HP auto control | |
| Temperature Display | Digital temperature display | |
| Directional Valve | YFWATERJET | |
| Accumulator Volume | 1.0 L | |
| Low Pressure Filter | 10 μ | |
| Water Supply | 1/2″ | |
| Water Pressure | 0.3 Mpa | |
| Water Drain | 3/8″ | |
| Pipeline Connection | HP 3/8″ M20 x 1.5 | |
| Compressed Air Pressure | 0.6 Mpa | |
| Connection for Hose | 6 mm | |
| Function | Description | |
| Air Cooling | Air cooling which saves places and costs and has good cooling effect. | |
| Overtemperature Alarm | An electronic temperature control meter is used to monitor the oil temperature and give an over-temperature alarm to avoid equipment problems caused by over-high oil temperature. | |
| Filtration | Water filtering device is adopted to avoid water quality problems and prolong the service life of equipment. | |
| Cutting Table | ||
 |
Structural style | Cantilever |
| X and Y axis Travel | 2000 × 1000 mm | |
| Z-axis Travel | 150 mm | |
| Control accuracy | ±0.01 mm | |
| Cutting accuracy | ±0.2 mm | |
| X/Y-axis Max. moving speed | 8000 mm/min | |
| Z-axis Max. moving speed | 1000 mm/min | |
 |
Cutting Head | Single head, 3 Axis |
| Way of Drive | AC Servo | |
| Servo System | INOVANCE | |
| Ball Screw | TBI | |
| Atmosphere Pressure | 86 Kpa ~ 106 Kpa | |
| Dust Concentration | Not More than 10 mg/m³ | |
| X Axis Structure | Aluminium / Steel Structure | |
| Water Tank | Coated Stainless Steel | |
| 3 Axis Cutting Head | |
| Special CNC System |  |
| 3 Axis Linkage Cutting | |
| Multiple Heads are Available | |
| Less Parameter, more stable | |
| Main Characteristics of CNC System | |
| Industrial PC |  |
| 18.5 Inch LCD Monitor | |
| YFwaterjet software | |
| Support DXF and NC code file | |
| Forward and backward processing function | |
| Even pace control function | |
| Partial and smooth processing modes | |
| Small arcs speed auto processing function | |
| Circle processing function | |
| Coordinate memory retention function | |
| Set delay time free | |
| Pause, continue and processing from any division function | |
| Auto Abrasive Delivery System | ||
| Max. Inlet Air Pressure | 0.3 Mpa |  |
| Min. Inlet Air Pressure | 0.2 Mpa | |
| Abrasive Capacity | 150 Kg | |
| Min. Inlet Air Flow | 0.028 m³/min | |
| Operating Air Flow | 0.005 m³/min | |
| Self-feeding Control | ||
| Air Valve to prevent jams and breakages | ||
| Self sealing | ||
| Equipment Installation Conditions | Specification |
| Installation Position | 1. Indoor, with a net height of not less than 4.5 m. 2. Temperature: 5 – 40 ℃ 3. Maximum relative humidity: 95 % |
| Water source requirements | Pressure > 0.3 Mpa, soft water |
| Power requirements | three – phase, 380V, AC, 60 Hz, 100 A, voltage fluctuation within 5 % |
| Air source requirements | Compressed air supply pressure: > 0.6 Mpa Compressed air supply flow: > 28.3 l / min |
| Oil Requirements | Need 120 L, antiwear hydraulic oil (46#) |
| Abrasive Requirements | Sand, size 60 – 100 mesh, consumption: 15 – 45 kg / h |
| Tool Kits List | Model | Qty (pcs/sets) | Application |
| Tools for plunger seal | YF-T-001 | 1 | Plunger seal maintenance |
| Tool for HP cylinder | YF-T-002 | 1 | HP cylinder maintenance |
| Tools for on/off body | YF-T-003 | 1 | For on/off valve |
| Tools for end cap | YF-T-004 | 1 | End cap maintenance |
| Air duster | YF-T-005 | 1 | Cleaning |
| Spare Parts List | Model / Specification | Qty | Application |
| Nozzle | YF-1227-1-40 | 1 | Used for cutting head body |
| Orifice | YF 0.3 | 2 | Used for cutting head body |
| On/Off Valve Seal | New C type | 1 | Used for cutting head body |
| Ceramic Insert | PEI12030 | 2 | Used for intensifier |
| Poppet | 12030 | 2 | Used for intensifier |
| White goop | Import | 1 | Used for anti-seizure of the threads |
| O-ring | 30×3.1 | 2 | Used for oil circuit |
| O-ring | 40×3.1 | 2 | Used for oil circuit |
| O-ring | 9.5×1.8 | 2 | Used for oil circuit |
| O-ring | 33.5×2.65 | 4 | Used for oil circuit |
| O-ring | 8×1.9 | 2 | Used for oil circuit |
| Back-up ring | 06A-01-05 | 2 | Used for oil circuit |
| Combined seal washer | Φ33 JB982-77 | 2 | Used for oil circuit |