APE Series H Type Power Press
- The symmetrical front-rear column structure designminimizes deflection and is most suitable for precisionprogressive die applications.
- No inherent angular deflection, which signifcantly extendsdie life and reduces cost of tooling maintenance.
- High rigidity structure ensures consistent dynamic precision.
- High torque, enclosed wet clutch brake unit requires minimalmaintenance,eliminates noise and pollution caused byairborne particles, and signifcantly extends lining life.
- User-friendly multifunctional control system.
- Designed to allow simple integration with automatedauxiliary equipments.
Specifications
| Item | Unit | APE-160 | APE-200 | APE-250 | APE-300 | APE-400 | |
| Model | – | S / H | S / H | S / H | S / H | S / H | |
| Capacity | Ton | 160 | 200 | 250 | 300 | 400 | |
| Rated tonnage point | mm | 6 / 3 | 6 / 3 | 7 / 3 | 7 / 3 | 7 / 3 | |
| Stroke | mm | 180 / 130 | 250 / 150 | 280 / 170 | 300 / 170 | 300 / 170 | |
| Stroke per minute | S.p.m | 30-55 / 40-85 | 20-50 / 35-70 | 20-40 / 30-60 | 20-35 / 30-50 | 20-30 / 40-50 | |
| Slide height | mm | 450 / 400 | 500 / 450 | 550 / 450 | 550 / 450 | 550 / 450 | |
| Slide adjustment | mm | 100 | 120 | 120 | 120 | 120 | |
| Slide area (Upper) | mm | 1600×650 | 1850×750 | 2100×900 | 2200×900 | 3100×1000 | |
| Slide area (Lower) | mm | 1800×760 | 2200×940 | 2500×1000 | 2500×1000 | 3200×1000 | |
| Slide opening | mm | 700×450 | 900×600 | 900×600 | 900×600 | 900×600 | |
| Main motor | Kw | 15 | 18 | 22 | 30 | 30 | |
| Slide adjust device | – | 0.75×4 | 0.75×4 | 1.5×4 | 1.5×4 | 1.5×4 | |
| Air pressure | kg/㎡ | 5 | |||||
| Presses precision | – | GB/JIS 1class Grade 1 | |||||
Standard Accessories
- Inverter
- Standard operating system of taiyida
- Electronic crank angle led display
- Electronic speed led display
- Operation mode selection (inching/safety one stroke/continuous)
- Hydraulic overload protector
- Overrun detector
- Portable 2-hand push
- Dual solenoid valve
- Motorized slide adjustment
- Digital die height indicator (unit 0.1mm)
- Slider and die balancing device
- Total counter, 6 digits
- Preset counter, 6 digits
- Maintenance counter, 4 digits
- Life counter, 6 digits
- Electronic rotary cam switch (6 spare channel)
- Air ejector 1/2″ one channel
- Air source receptacle 1/2″ two channel
- Misfeed detection circuit
- Power receptacle (available only for single phase, 110V power source wiring by user)
Optional Accessories
- Die cushion
- Vs motor
- Safety light curtain
- Slide block-out device
- Main motor reversing circuit
- Foot switch
- Dual solenoid valve with detector
- Electric yellow pump
- Dual solenoid valve
- Missfeed detector
- Flywheel brake
- Anti-vibration mounts
- Quick die change system
- Upper die clamper
- Lower die clamper
- Die lifter
- Die arm
- Anchor bolts & foundation plates
- Automatic feed equipment
- NC straightener Feed c/w uncoiler (3 in 1)
- Safety solenoid valve plug
- NC roller feeder
- Straightener c/w uncoiler (2 in 1)
- Staightene
Machine Configuration
| Item | Brief Description |
| Machine Body | Steel plate welded structure, through vibration aging treatment, the overall heat ageing annealing treatment. (Double aging treatment) |
| Bolster | Made from Casting HT200, through annealing treatment |
| Crank | Made from Forging, through flaw detection, surface quenching, nitriding processing |
| Fly Wheel | Casting HT200, Through Annealing Treatment |
| Worm | Zinc-based alloys |
| Worm Gear | Made from 45# steel |
| Connecting Rod | Made from Ductile iron, cast iron, and through normalizing treatment |
| Ball Head and Screw | Made From 45# steel, surface by Nitriding treatment |
| Balance Cylinder | Cylinder Body Inside Through Honing Processing |
| Component | Specification / Brand |
| Machine body | Steel metal machine body, iron cast working table |
| Gears | Forging die gear grinding with Germany NILES grinding machine |
| Inverter | TECO (Taiwan) |
| Motor | TECO (Taiwan) |
| Double-solenoid valve | TACO (Japan) |
| CLUTCH | OMPI (Italy) |
| Over-load protector | KINGAIR (Taiwan) |
| Bearing | NSK (Japan) |
| Oil seals | NOK (Japan) |